Recipe: Distiller's Gin Wash

Gin Recipe

Making great tasting homemade gin is easy with our range of specialised gin products.

Once you know which style you'd like to make, you can choose from range of Gin Botanicals (pictured below) or alternatively, you can make your own botanical blend based on a custom recipe.

If you are using a Turbo 500 Still or the Alembic Pot Still, we recommend using our Botanical Basket. If you are using an Air Still, you should use the Air Still Infusion Basket. A whole pack of Gin Botanicals (62 g) is used with the Botanical Basket, and approximately half a pack (30-35 g) is used with the Air Still Infusion Basket.

London Dry 2Mint Leaf2Rosemary2

Now that you've chosen your botanicals, it's time to make your wash! So let's get started...

You will need:

Method:

  1. Add 21 L (5.5 US Gal) of water at approximately 30°C (86°F) to your cleaned and sanitised fermenter.
  2. Add 6 kg (13 lb) sucrose or 6.6 kg (14.5 lb) dextrose to the water and stir until dissolved. You should now have approximately 25 L (6.6 US Gal) of sugar wash ready for fermentation. Add Turbo Carbon (if you wish) and stir well – this will adsorb impurities produced by the yeast during fermentation, improving the quality of your alcohol.
  3. Shake the jar of Distiller’s Nutrient and measure out 150 g (5.3 oz). Add the Distiller’s Nutrient and Gin Distiller’s Yeast to the fermenter at the same time and stir well to dissolve. Fit your lid and airlock (half filled with previously boiled water).
  4. Leave to ferment at 20-32°C (68-90°F) ambient temperature for optimum results.
  5. Once your airlock stops bubbling, this indicates that fermentation is complete. This should happen within 7 days, provided the temperature has remained above 20°C (68°F) throughout fermentation. Using a hydrometer, check the Specific Gravity (SG), then check again 24 hours later to make sure it has stabilised.
  6. Once the SG is stable, leave the wash to stand for 1-2 days to allow any remaining solids and yeast to settle out. Adding Turbo Clear at this stage will help speed up the clarification process.
  7. Once settled, the wash is ready for distillation. Syphon the wash into your still to leave behind any sediment. For the best quality spirit, we recommend using a reflux still such as the Turbo 500 Condenser for your distillation. Please refer to the instruction manual of your distillation unit for detailed instructions on distilling your spirit.
  8. After your first distillation, you may wish to filter your spirit through a carbon filter to polish it for a smoother flavour.
  9. You are now ready for your botanical infusion distillation run! Please refer to the instruction manuals for your distillation unit and botanical basket for detailed instructions on distilling your spirit.

Head to your local Still Spirits stockist to pick up your ingredients and get distilling today.

Don't forget to share your creations with us on our Facebook page or tag us on Instagram. As always, if you have any questions, please feel free to contact us via social media, leave a comment below, or send us a message directly here.